Good feedback 3d material filament ABS filament for 3d printer
FAQ:
Q1. Does your filament has any air bubble problems?
A: No, our product does not have these problems. There are two main factors that cause air bubble problem. First, using recycle material, machine cannot melt some dust in recycle raw material thus cause dust and bubbles in the filament. All kingjet raw material is original, no recycle, producing good quality ABS/PLA filament. Second, raw material not dry enough before putting in production, the water in raw material becomes air when heated and being extruded by the machine. In kingjet production line, material must be fully dry for 3-5 hours before putting in production. So kingjet ABS/PLA filament will not have bubble questions.
Q2. How is kingjet filament diameter control?
Kingjet have diameter laser detect kits to control extruding rate on line. When diameter is smaller or higher than the acceptable range, the laser detect kits will adjust the extruding rate to make the diameter range acceptable. All kingjet filament diameter deviation is within +/- 0.05mm.
Q3. Will your filament ruin our printer?
A: Filament quality is very important for 3d printer and printed products. Kingjet filament does not have bubble and dust problem so the surface of your printed product will be smooth. kingjet filament has good diameter control, thus it could work well with your 3d printer nozzle and it will not stuck in it. So kingjet 3d printer filament will be harmless for your 3d printer.
Advantages:
1 Tolerance can be controlled within+/-0.05mm;
2 No convex on the filament;
3 Excellent roundness of the filament;
4 Bright and clean filament surface;
5 More than 24 colors optional, color of beauty and aesthetics;
6 100% environment friendly;
7 Good transparency for natural PLA filament
Color
We have many colors: White, Black, Yellow, Green, Blue, Pink, Purple, Gold, Silver, Brown, Nature, Clear, Red, Orange, Turquoise, Fluorescent series, Transparent series, Luminous series.
Good feedback 3d material filament ABS filament for 3d printer